Mill-It MEGA QTC

Say goodbye to Z setting! This spindle is just like an auto tool change in manual mode!

The QTC spindle now available on the Mill-it-MEGA

The Mill-it-Mega CNC milling machine can now be supplied with the QTC spindle. The QTC (Quick Tool Change) spindle allows all tool offsets to be maintained in the tool holders.

  • HSK32 tool holders in ER11, ER16, ER20 and ER25 available

  • 2000kg of holding force when the tool holder is secured with the torqued allen key tool

  • Setup all tools and capture all offsets for quick tool changing without the headache of resetting the Z-axis each time

  • The software prompts you to change out the tool and load the tool needed for the next operation

  • Setting the tool offset is only needed once you break a tool or a tool is worn and must be replaced.

mill-it-mega-qtc -21.jpg
mill-it-mega-qtc -22.jpg
mill-it-mega-qtc -23.jpg
mill-it-mega-qtc -1.jpg
mill-it-mega-qtc -20.jpg
mill-it-mega-qtc -2.jpg
mill-it-mega-qtc -3.jpg
mill-it-mega-qtc -4.jpg
mill-it-mega-qtc -5.jpg
mill-it-mega-qtc -6.jpg
mill-it-mega-qtc -7.jpg
mill-it-mega-qtc -8.jpg
mill-it-mega-qtc -9.jpg
mill-it-mega-qtc -10.jpg
mill-it-mega-qtc -11.jpg
mill-it-mega-qtc -12.jpg
mill-it-mega-qtc -13.jpg
mill-it-mega-qtc -14.jpg
mill-it-mega-qtc -15.jpg
mill-it-mega-qtc -16.jpg
mill-it-mega-qtc -17.jpg
mill-it-mega-qtc -18.jpg
mill-it-mega-qtc -19.jpg