Connect CNC Conversion

Connect CNC router retrofit

The Connect CNC router was picked up during a clearout and lay dormant for a year or so in the workshop until the was time to give her the TLC she needed to get back up and running.

The main Y-axis ball screw driving the table was replaced with a fully new driving system. The CNC router now has a new ball screw, ball nut, Y-axis motors, and end encapsulation of the ball screw. The axis is driven by a motor and matched drive voltage and stepper drives for optimum torque and performance.

The machine design is based on a skeletal aluminium frame that doubles up as a full enclosure for the machine.

The system has been fitted with a 2.2kW Chinese spindle powered through a VFD. The machine runs on a standard single-phase AC supply. The spindle mount itself has an integrated dust show with brushes and the spindle runs with the popular ER20 collet.

Frequently Asked Questions

  • If you have a question that has not been answered here or need more information on any information provided, please complete the form below (click the “Ask a Question” button) and we will happily reply to you and extend this page or this FAQ section.